Happy Thanksgiving Everyone!
The other day when I posted the bus for sale and talked about sharing some bus conversions, I was surprised by how many responses I received. There is quite an interest in this idea and I see several posts in the future on this subject.
Jake was one of those who emailed me the other day and shared his story with me. I decided to postpone the bus conversion I was originally planning to show you and share Jakes story instead.
In 1982 I was a sophomore at a small college in the Midwest. It was the beginning of second term and I was again standing in line at the on-campus book store waiting to pay for a too-heavy stack of text books. The line was not moving at all so I put my books down on the floor and started flipping through the coffee table books on display. The book I chose to pick up first was titled Rolling Homes – Handmade House on Wheels by Jane Lidz. Thus the seed was planted.
This project was first published on vonslatt.com so I thought I’d collect some of the best images from the original build log and re-publish them since this was really the first steampunkish project I did.
If you are thinking about converting an old school bus into a motor home one of the first things you should do is give it a paint job. In fact, in many states you may not be allowed to register a yellow bus until it’s painted. I went with a nice green and almond livery, the lighter color on top to help keep the bus cooler in the summer sun.
Heres a shot of the salon, the table is a solid core door from Home Depot with legs made from a pair of old hat stands. The kitchen sink came from the aformentioned metal recycling bins at the dump and I bought the RV stove and dorm room style ‘fridge.
This is the door to the bathroom and the kitchen cabinets. Much of the cabinetry came from Craigslist.org and from friends who were renovating their kitchens. I trimmed the edges off of these oak doors so that I could fit them flush into the cabinet face frame for a more period look.
I chose the paint colors to try and tie the carpet color to the buses interior. When you are working with recycled materials paint is one of the few color choices you get to make. The darker green is from Glidden and is named “Mystic Seaport” and the lighter green is the closet match I could find for the school bus interior paint color and is called “Light Tourmaline.” The carpet came from a friends dinning room.
All and all I think the blues go quite well with the golden and woody tones of the woodwork and upholstery .
There was not a lot of room for much more then a futon in the master’s cabin. The futon’s base is from an old waterbed and contains six drawers, the engine hump at the back is covered in more carpet and makes a nice nightstand.
Most of the storage for the master bedroom is in the partition between it and the bunk room, its about a foot thick and contains a closet as well as a fold down desk on the right.
This is the original photo of the bus from the eBay ad – with all of the lights, PA, and STOP signs still attached.
Frequently Asked Questions:
Q. Do you need a special drivers license?
A. Nope, not as long as it is registered as a recreational vehicle, no matter how big it is. Most states have some requirements as to what constitutes an RV and this usually means you have to have such things as a 110 volt electrical system, a bathroom and built-in beds or bunks.
Q. Why not just buy a used RV?
A. Because I wanted something different, something I made myself. Also, school buses are very, very tough and thus much safer then an RV in an accident.
Q. How much did it cost?
A. About $2000 for the bus, $750 to have it delivered from about 300 miles away on a flat bed, and I figure I’ve put about $3500 into the conversion – but some of that was for tools which don’t really count. I bought the bus on eBay and I was lucky. A bus like this is usually about four grand.
Q. How fast does it go ? What kind of gas mileage do you get?
A. My bus is a 1989 Thomas Saf-T-Liner with a CAT 3208 10.4 Liter diesel engine and around a 100K miles on it. It’s got 210 HP but gobs and gobs of torque so it will do 60- 65 on the highway and get 9-11 miles per gallon. Its also great for pulling stumps.
Q. How did you paint it?
A. I took off all the trim and lights and the painted with True Value XO-Rust ( others have used Rustoleum ) and a 3/8″ nap roller. I used a brush for small areas. A single coat covered quite well and three years later the finish is as good as new. Total cost to paint: about $100
There’s a summary and a video of my project here: (similar to this post)
http://steampunkworkshop.com/bus1.shtml
With some build info here:
http://steampunkworkshop.com/bus2.shtml
and the complete build log here:
http://www.vonslatt.com/bus-main.shtml
Thanks Jake for sharing your story and for the links with all the great information for those who may want to do this type of project themselves.