This Slabtown Customs creation is based on the popular French Cube with some modifications, the biggest being the size. This unit is a 12′ cube, 12×12 footprint and 12′ tall with a very roomy second level for sleeping quarters and storage/closet space, with stair access to upper level
The attached pictures were taken before total completion of the unit so there are some things yet to be done such as a little trim, bathroom door, as well as some kitchen items I mention below.
The house is constructed on wooden skids, it has 2×8 floor joists, 16″ on center with steel hurricane ties on each end of every joist, 3/4″ thick floor decking, standard site built house framing, metal roof, 36″ entry door with window. The house has two 3×3 windows as well as a 2×2 plus the window in the door on the lower level and two 3×3 plus one 2×3 window in the upper level filling the house with lots of natural light. The house is fully insulated with fiberglass in the floor, walls and ceiling, it is wired and plumbed like a site built home but set up with rv type hook-ups including a 50 amp 110v electric service.
The bathroom has a 32″ shower stall, full size toilet, and a 18″ sink/vanity
The kitchen has a small sink, fridge with top freezer, 45″ overhead cabinets, 36″ sink base cabinet, yet to be installed in kitchen and not seen in pictures are a two burner cook top, microwave and large toaster/convection oven.
The house has a 19 gallon water heater. There are some storage items already installed in the upper level. Also to be done in the upper level are finishing touches to the closet space which will include nearly 6′ of hanging storage, approx 2′ of shoe/clothes storage. To be added before delivery will be a 110v RV type washer/dryer combo, this will be set in place above the water heater as seen in the pictures of the upper level. Another item to be added before delivery will be a heat/air unit that will be installed in the wall about halfway up the steps leading to the upper level allowing air flow to the lower level, upper level or a mix.
Interior walls and ceilings are finished with a bead board pine panilling, lower level floor is a cherry finish hardwood laminate, upper level has carpet.
This is a trial run to test the waters on this design, this could be the first of many or the one and only, I am hoping for a quick sale and looking to move it out ASAP the house is priced at $13,750 with everything mentioned above. Delivery is available anywhere in the continental US for $2 per loaded mile.
Contact Scott Stewart at 870-213-5310
Mountain View, Arkansas
Email: ozarksbest@yahoo.com