Tiny House Blog

Stephanie Reiley of Coming Unmoored pointed this great find out to me on facebook the other day and I wanted to share with you this neat prototype that I personally hope will go into production one day.

The Taliesin Mod.FabTM is an example of simple, elegant, and sustainable living in the desert. The one-bedroom, 600-square-foot prototype residence relies on panelized construction to allow for speed and economy on site or in a factory.

It can be connected to utilities or be “unplugged,” relying on low-consumption fixtures, rainwater harvesting, greywater re-use, natural ventilation, solar orientation, and photovoltaics to reduce energy and water use. The structure is dimensioned and engineered to be transportable via roadway.

The Taliesin Mod.FabTM was designed and built by graduate and undergraduate students at the Frank Lloyd Wright School of Architecture with the faculty guidance of Michael P. Johnson and Jennifer Siegal, project manager Christian Butler, recent M.Arch graduate, and assistant project manager Nick Mancusi, current BAS student.

You can view the construction of this home at the PrairieMod blog and more pictures at the Taliesin Mod.FabTM site.

Photo Credits Bill Timmerman

If you enjoyed this post, subscribe to our feed

I promised an update on the Solargon Structure’s Yurts and Doug Kirk has been kind enough to give me some figures to share with you. I have also added some photos of the larger yurt they produce. The 30 foot yurt, so look it over and enjoy. See the previous post on the Solargon Structure’s Yurt here.

MSRP for the 20′ model is $ 22,500

Included:

All walls R28 and roof panels R42, micro-lam headers, wall to wall connecters, aircraft grade octagon operable skylight, compression ring w/header, screws for assembly and owner’s assembly manual. Walls cam-lock together in seconds and the typical erection time is 4 to 5 hours.

MSRP for the 30′ model is $ 39,900

Included:

All walls R42 and roof panels R42, micro-lam headers, wall to wall connectors, glue-lam super structure and rafters, operable skylight,compression frame w/header and assembly manual. Wall and roof panels cam-lock together and the typical erection time is 2 days.

Some will say that they sound expensive but you save time and money on assembly, very little waste or theft, and no expensive contractor needed. When your home is up you have the walls, roof, insulation, and rough electrical with boxes ready to go for about $55.00 per sq. ft. You then choose the interior and exterior finishing of your choice. An average home will cost about $125 to $150 per sq. ft. to finish so Solargons are very competitive.

Additional value is in the energy savings for the life of the building. You can upgrade your lifestyle with energy savings and lower your carbon footprint and live in a open and light living space.

Your kit can be shipped anywhere and can be put together by customers. We do supply tech support or can assist with your project.

Visit www.solargonsales.com for more pictures. You can also view a virtual interior of a 30′ model to get an idea what the interior would look like. See interior of 30′ Solargon.

30' Solargon Floorplan

20' Solargon Yurt

If you enjoyed this post, subscribe to our feed

David Kent one of the Tiny House Blog readers recently sent me to this link of SIP built yurts built in Colorado. The company is called Solargon Structures, at this point I have not communicated with the owners directly, but hope to hear from them soon as far as prices go and to how far away these can be shipped and built.

Solargons are octagonal buildings featuring passive solar design principles. The shape is inspired by design elements from Native American and Asian nomadic tribes, while the materials represent the latest in green building technologies.

Both the construction materials and the construction process are designed to minimize setup time, and maximize the building’s lifetime performance.

Solargon Kitchen

On site assembly requires mere hours for the 20’ model and less than two days for the 30’ model.

Solargon’s 20’ diameter buildings serve admirably in a variety of ways: recreational cabins, second homes, mother-in-law apartments, art studios, ski huts, military housing, emergency housing, satellite classrooms, etc.

See update with pricing Here!

Solargon Yurt Interior

The new 30’ diameter building makes an ideal starter homes, club houses, recreational centers, corporate retreats and sales buildings. Each 30’ model can be attached or linked to additional Solargons for even more floorplan flexibility.

Visit the Solargon Structures website to learn more.

Below you can see the actual construction of a twenty foot Solargon yurt that is used for a ski patrol warming hut in Colorado.

Delivered to Site

SIP Walls Installed

Roof Installed

Exterior Membrane

Completed Solargon Yurt

If you enjoyed this post, subscribe to our feed

Powerderhorn Ski Hut in Use

There has been a lot of discussion on the Small House Society Yahoo list lately about the Sing RV Rent to Own mini park model built in McCleary, Washington. I decided to get in touch with Sing RV and learn more about this product. I have been talking to Peter Sing and his Sales Director Jason Vaughn and have discovered a very affordable option for a tiny home.

The Sing RV is built using the Sing honeycomb product designed by Sing. The Sing honeycomb panels are made with patented Sing honeycomb core which is a low cost, high strength, lightweight panel. These panels can be made into any type of structure you can imagine.

Sing sells the mini park models assembled and as a panel kit. Assembled, the 8 x 14 foot mini park model is $7,000.00, on wheels it is $8,500.00. The kit is about a third of the cost. They also offer a Rent to Own option, but you need to discuss this with them to get the full details.

Sing also has another option of building with their special logs. I will share this option with you in another post.

Go to the Sing RV website to see these homes under construction and how easy it is to build a unique home with them.

Sing RV Interior Windows

Sing RV Interior View

Sing RV on the Road

If you enjoyed this post, subscribe to our feed

I’m quite a big fan of Mother Earth News and in most of their recent issues there are always articles on SIPs or Structural Insulated Panels.

I started doing some research on tiny houses using SIPs and found a great site and company who specializes in tiny or small buildings called Little Green Buildings based in Port Angeles, Washington.

They are a small company with great customer service. There buildings range in size from 32 square feet to 400 square feet and are quite reasonably priced.

Getaway

Why Use SIPs? Here are a few good reasons.

• Extremely energy efficient.
• Super insulated floors, walls and roof.
• Small heating and air conditioning equipment = much lower utility bills and no more cold feet.
• Because of the core system of rigid foam no mold, no bugs.
• And a great fire rating!
• Stronger, straighter, three times faster to build.
• No vapor barriers to worry about.
• Little or no waste.
• No need for bird blocks or ridge vents.
• Storm and earthquake resistant.
• Snow loads just about anywhere on earth.
• Super quiet. Need a place to shut out the noise of every day life?
• More space. Because the roof itself is insulated “no attic”, more room for loft or storage space.

Here are a few more samples of Little Green Buildings designs:

Chalet

Beachfront Study

River Shack